 |
INSTALLATION FOR BDL BALL BEARING LOCK UP CLUTCH |
 |
 |
 |
 |
 |
BPP-100 BDL pressure plate with 32 - |
Place BDL diaphragm over ball bearings on pressure plate. |
Place BDL retainer over diaphragm and insert shoulder bolts. |
 |
 |
 |
| Holding assembly with pressure against the diaphragm so that the ball bearings are secured, place assembly on to clutch basket. |
While firmly holding assembly on clutch basket, locate holes in the clutch hub and screw the shoulder bolts in. |
Tighten shoulder bolts down to approx. 25 TO 30 foot pounds. |
 |
 |
 |
| BPP-700 Lock up for Primo belt drives 1990-2007. Pressure plate with 42-5/16 “ chromium steel ball bearings. |
Place BDL diaphragm over ball bearings then use Primo retainer, adjustment screw and bolts and install assembly onto Primo clutch basket using proceedure outlined above. Re-adjust clutch per Primo instructions. |
BPP-500 Lock up for HD 1998-2007 BDL pressure plate with 45- 5/16” chromium steel ball bearings. Install with stock HD diaphragm, retainer and bolts and install as per HD manuel. Re-adjust clutch as per HD manuel. |