Parts For Harley-Davidson® Motorcycles

Front stock replacement fender for Road Glides or Road Kings 94-09 FLT, FLHT, FLHR, FLTR models. 

6.5" wide, heavy gauge steel construction without rivets. 

Comes pre-drilled for easy installation. 

Fenders are inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork. 

Handmade in the USA. 

All fenders must be prefitted prior to painting. 

Note:  All measurements are approximate

Zoom In

2.5” direct bolt on tank for 01-07 softails.  One piece tank features a curved bottom for a custom look.   This tank uses the stock dash and accepts any aftermarket cap.  Comes with fuel gauge bung and filler bung. Approximately 5.5 gallon fuel capacity.   Dimensions are: 23-1/2" Long x 17-1/4" Wide x 9" High.  Tunnel width is 3-1/4".  We offer a low profile dash that fits this tank available in our online store at this link:

Low Profile Dash for RWD 2001-2007 Softail Tank

These tanks are powdercoated on the inside to ensure a clean sealed surface.  There is no need to etch or use any other sealer.  Minimal prep work will be needed prior to paint.

Requires stock seat modification.  Seats are sold separately.

Made in the USA using 16 gauge stamped steel.  Tig welded by an American craftsman.

Warning: all tanks are shipped unpainted.  All gas tanks should be fitted before being painted to eliminate potential problems.

Zoom In

3" stretch direct bolt on tank for 03-07 Fuel Injected, or 96-06 Carbureted Road Glides, Electra Glides or Street Glides, One piece tanks feature a curved bottom for a custom look. Available in 2 widths; 17.5" (approximately 6 gallon capacity), or 20" (approximately 6.5 gallon capacity). Includes raw dash panel that replaces the existing dash. Any aftermarket cap will fit. We recommend PN RWD-0703-0060.

Fuel-injected tank accepts the stock O.E.M. fuel-pump assembly and uses a L96-07 vented gas cap. Carbureted tanks include a filler plate/neck assembly and use a L96-07 vented gas cap.

These tanks come powder-coated on the inside to ensure a clean sealed surface. There is no need to etch or use any other sealer. Minimal prep work will be needed prior to paint.

Requires stock seat modification. Tanks fit with RWD Profile (PN RWD-0804-0247) and Protour (PN RWD-0804-0248) Seats, sold separately.

Note: Filler plate on carb tanks may require modifications to reinstall early-style sending unit.

Made in the USA using 14 and 16 guage steel. Tig welded by an American Craftsman.

Zoom In

3" stretch direct bolt on tank for 03-07 Fuel Injected, or 96-06 Carbureted Road Kings. One piece tanks feature a curved bottom for a custom look. Available in 2 widths; 17.5" (approximately 6 gallon capacity), or 20" (approximately 6.5 gallon capacity). Includes raw dash panel that replaces the existing dash. Any aftermarket cap will fit. We recommend PN RWD-0703-0060.

Fuel-injected tank accepts the stock O.E.M. fuel-pump assembly and uses a L96-07 vented gas cap. Carb tanks include a filler plate/neck assembly and use a L96-07 vented gas cap.

These tanks come powder-coated on the inside to ensure a clean sealed surface. There is no need to etch or use any other sealer. Minimal prep work will be needed prior to paint.

Requires stock seat modification. Tanks fit with RWD Profile (PN RWD-0804-0247) and Protour (PN RWD-0804-0248) Seats, sold separately.

Note: Filler plate on carb tanks may require modifications to reinstall early-style sending unit.

Made in the USA using 14 and 16 guage steel. Tig welded by an American Craftsman

Zoom In

Extended Lower Saddlebags. Uses Stock Hardware. Fiberglass construction.

Comes as a set of two lower saddlebags without lids.

5" Longer than Stock Saddlebags. Dimensions are 22" wide X 17-1/4" Long X 7-1/2" Thick.

The extended bag area is not useable space.

Zoom In

Heavy gauge steel construction. 9.5" wide stock Softail fender available with or without taillight assembly.

Predrilled; no spacers required.

Flat mounting surface for the electronic panel.

Fits 2006-2009 FX Softails. Fits with stock seat and stock fender struts.

Does not fit Deuces.

Handmade in the USA.

All fenders must be prefitted prior to painting.

Note: All measurements are approximate.

Zoom In

Smoother Rounded Saddlebag Lids to match the flowing lines of our Gas Tank and Front Fender.

Uses Stock Hardware.

Fiberglass construction.

Zoom In

Threadless pop-up Gas Cap/Adapter.

Measures 2-3/4" diameter x 1-1/4" high.

Protects Paint. Screws into stock Harley filler bung.

Comes in raw aluminum so it can be painted to match, or in chrome (Part# RWD-50035).

Not vented.

This gas cap is designed to be a sealed cap using an external tank vent.

Will not fit Sportsters.

Made in the USA.

Sleek low profile dash replaces the bulky stock dash on stock 1996-2007 Road Glides.

Measures 18-1/4" Long x 5-1/2" Wide x 4-1/4" High. Material is polished cast aluminum.