Feuling Home | Cam Installation Kits | Camplates | Camplate Hardware | Camshafts | Combo Kits
Fasteners | Filter Coolers | Lifters | Oil Pumps | Oil Tank Breathers | Pushrods | Tools | Valve Springs & Guides
Part# FE-9019 Camplate Pressure Test Tool
This pressure test tool is a must for any Twin Cam engine builder. Bench test the camplate before installation. Set the relief valve spring pressure to your desired pop off psi. Tool includes regulator & 0 – 100 psi pressure gauge and it fits all Twin Cam engine camplates.
Part# FE-9000 Pressure Relief Spring / Valve Removal Tool
The pressure relief spring/valve removal tool makes for easy removal and installation of the pressure relief spring, by-pass valve and roll pin in the Twin Cam camplate.
Fits all Twin Cam engine camplates
Part# FE-9015 Feuling® Crankshaft Run-Out & Gear Drive Backlash Tool
This tool simplifies and speeds the process of checking crankshaft run out on both Twin Cam® and EVO® model engines with the crankshaft installed. The tool mounts to the cam chest side of the engine case using the designated mounting holes of the tool combined with the handled thumb screws and the case cam cover bolt holes. The tool gives quick and accurate readings of the engines crank pinion shaft run out.
Tool includes: tool plate, +/-0.001”dial indicator, thumb screws & hardware
Fits: Twin Cam® 1999 – Present
EVO® 1984 – 1999
Valve Spring Seat Cutters & Cutter Pilots
Machine valve spring seats for proper installed spring height and spring cup fitment. Cutter bodies and pilots are interchangeable, Hardened pilots fit all 3/8” and ½” hand drills.
I.D. x O.D.
Part # FE-9020 Cutter .625” x 1.570”
Part # FE-9021 Cutter .625” x 1.635”
Part # FE-9022 Cutter .625” x 1.750”
Part # FE-9025 Pilot 5/16” – 8mm EVO & T/C up to 2004, EVO Sportster ’86-up
Part # FE-9026 Pilot 7mm T/C 2005 and newer
Part # FE-9027 Pilot 3/8” Pan & Shovel Head 1948 - 1984
Part#9030 Valve Spring Height Tool
Measure installed valve spring height. Place tool on cylinder head in place of valve spring with spring cup and retainer in place, twist measuring tool to get accurate spring height measurement.
