Feuling Home | Cam Installation Kits | Camplates | Camplate Hardware | Camshafts | Combo Kits
Fasteners | Filter Coolers | Lifters | Oil Pumps | Oil Tank Breathers | Pushrods | Tools | Valve Springs & Guides

BEEHIVE® High Load Springs

FEULING® high load premium performance BeeHive™ valve springs for steep ramped large lift camshafts - These Feuling® valve springs are made from premium stress relieved conical ovate wire with a nitrided surface heat treatment, shot-peened surface enhancements along with a Nano Peen™ polish. They have an extremely high level of fatigue life and are designed to handle the highest demands of performance engines with high lift, steep ramped camshafts. Dyno proven and track tested.

Kits include: FEULING® High Load BeeHive™ valve springs, lightweight 10°Titanium retainers manufactured from special Ti-17 alloy and micropolished for enhanced fatigue life, machined heat treated chrome moly spring seats and valve locks and a set of premium Viton® valve seals equipped with a spring loaded valve stem wiper system.

Don’t get stung by inferior valve springs

215 Lbs @ 1.800” (0.585” Lift)
200 Lbs @ 1.850” (0.635” Lift)
185 Lbs @ 1.900” (0.685” Lift)
415 Lbs @ 1.215”



*FEULING® Beehive™ valve spring kits are direct replacement no machining or rocker box clearance required up to .574” lift for ’84-’04 Big Twin,’86-’03 XL, and up to .700”lift for ’05 – ’10 Twin Cam. Larger lift camshafts require valve guide machining for seal to retainer clearance.

Part# FE-1200 High Load BeeHive spring kit
Fits: 1985-2004 5/16″ Valves - 200+ Springs, Ti Retainers, Seats, Seals, Keepers

Part# FE1205 High Load BeeHive spring kit
Fits: 2005-2010
7mm Valves - 200+ Springs, Ti Retainers, Seats, Seals, Keepers

Part# FE-1206 Offset Valve Locks 0.050″
Offset valve locks 0.050″ raises valve spring installed height, Steel, 10°Standard keeper groove 5/16″ stem valves

Part# FE-1214  Ti – valve locks
Ti – valve locks, 10°, 5/16”standard height, fits FEULING® high load BeeHive™ valve spring set up.

BEEHIVE™ ENDURANCE SPRINGS

FEULING® endurance BeeHive™ valve springs are machined from a premium grade Hi-tensile chrome silicon single conical ovate wire, shot-peened with a specially processed thermal heat treat and super NexTex® finish to give these valve springs the needed fatigue life to exceed the high demands of V-Twin engines from stock to performance.

Kits include: FEULING® endurance BeeHive™ valve springs, lightweight 7° super Titanium heat treated retainers, machined chrome moly spring seats and valve locks and a set of premium Viton® valve seals equipped with a spring loaded valve stem wiper system.

Don’t get stung by inferior valve springs

185 Lbs @ 1.785” (0.635” Lift)
160 Lbs @ 1.800” (0.650” Lift)
375 Lbs @ 1.150”

Part# FE-1100 Endurance BeeHive spring kit 1985 - 2004
Fits 5/16″ Valves - Springs, Ti Retainers, Seats, Seals, Keepers

Part# FE-1105 Endurance BeeHive spring kit 2005 - 2010
Fits 7mm Valves - Springs, Ti Retainers, Seats, Seals, Keepers

Valve Seals

High quality Viton valve seals designed to handle high engine temperatures with a built in spring loaded wiper to clean excess oil from valve stem with minimal friction. Includes 4 seals & seal installer tool.

Part # FE-1075 EVO, Sportster & Twin Cam up to 2004
Part # FE-1076 Twin Cam 2005 and newer